不锈钢, 17, 7PH,箔, FeCr17Ni7, Annealed-Condition A Temper, 0.075mm厚
产品介绍
| 订货号 | 包装规格 | | Disc | | 765-318-11 | 4mm | | 664-772-91 | 6mm | | 096-613-50 | 8mm | | 076-689-39 | 10mm | | 586-169-16 | 15mm | | 271-146-67 | 25mm | | 893-327-80 | 50mm | | Coil | | 290-030-82 | 300mm x 0.5m | | 952-368-92 | 300mm x 1m | | 046-122-50 | 300mm x 2m | | Sizes | | 174-057-82 | 25mm x 25mm | | 757-227-55 | 50mm x 50mm | | 653-446-19 | 100mm x 100mm | | 680-764-90 | 150mm x 150mm | | 095-618-98 | 300mm x 300mm |
产品参数 | Coil Width[卷材宽度] | 300mm | | Diameter[直径] | 4mm - 50mm | | Grade[等级] | Precipitation Hardenable | | Temper[状态] | Annealed - Condition A | | Thickness[厚度] | 0.075mm | | Typical Analysis(典型分析) | | Al | 1.15 Percent | | C | 700 PPM | | Cr | 17 Percent | | Mn | 7000 PPM | | Ni | 7 Percent | | Si | 4000 PPM | | Thermal Properties(热性能) | | Coefficient of thermal expansion ( x10⁻⁶ K⁻¹ ) | 15.300 @20-90℃ | | Melting point ( C ) | 1435.00 | | Thermal conductivity ( W m⁻¹ K⁻¹ ) | 16.70 @23℃ | | Mechanical Properties(机械性能) | | Elongation at break ( % ) | < 25.0 | | Izod impact strength ( J m⁻¹ ) | 61.0 - - 115.0 | | Modulus of elasticity ( GPa ) | 214.0 | | Tensile strength ( MPa ) | 1020.00 - 1550.00 | | Physical Properties(物理性质) | | Density ( g cm⁻³ ) | 7.810 | | Electrical Properties(电气特性) | | Electrical resistivity ( μOhmcm ) | 80-85 |
其他参数 公差 | 长度 | <100mm | ±1mm |
|---|
| ≥100mm | +2% / -1% | | 直径 | <100mm | ±1mm |
|---|
| ≥100mm | +2% / -1% | | 厚度 | <0.01mm | ±25% |
|---|
| ≤0.05mm | ±15% | | >0.05mm | ±10% | | 长度 1 | <100mm | ±1mm |
|---|
| ≥100mm | +2% / -1% | | 长度 2 | <100mm | ±1mm |
|---|
| ≥100mm | +2% / -1% |
| |
Goodfellow（顾特服）电话: 点击&查看18024074014地址:
同品牌产品：
相关产品：
|
m.cnreagent.com
