Diameter[直径] | 1mm |
Length[长度] | 0.05m - 0.2m |
Purity[纯度] | 99.9% |
Temper[状态] | Hard |
Typical Analysis(典型分析) |
Al | 5 PPM |
Ca | 7 PPM |
Ce | 100 PPM |
Fe | 25 PPM |
La | 100 PPM |
Mg | <1 PPM |
Pr | 100 PPM |
Si | 15 PPM |
Sm | 100 PPM |
Ta | <0.1 PPM |
Y | 100 PPM |
Atomic Properties(原子属性) |
Atomic number | 60 |
Atomic weight ( amu ) | 144.24000 |
Crystal structure | Hexagonal Close Packed |
Electronic structure | Xe4f⁴6s² |
Ionisation potential ( No./eV ) | 2 / 10.72 |
Ionisation potential ( No./eV ) | 1 / 5.49 |
Natural isotope distribution ( Mass No./% ) | 148 / 5.7 |
Natural isotope distribution ( Mass No./% ) | 145 / 8.3 |
Natural isotope distribution ( Mass No./% ) | 142 / 27.2 |
Natural isotope distribution ( Mass No./% ) | 143 / 12.2 |
Natural isotope distribution ( Mass No./% ) | 150 / 5.6 |
Natural isotope distribution ( Mass No./% ) | 146 / 17.2 |
Natural isotope distribution ( Mass No./% ) | 144 / 23.8 |
Photo-electric work function ( eV ) | 3.20 |
Thermal neutron absorption cross-section ( Barns ) | 49.0000 |
Valences shown | 3 |
Thermal Properties(热性能) |
Coefficient of thermal expansion ( x10⁻⁶ K⁻¹ ) | 6.700 @0-100℃ |
Latent heat of evaporation ( J g⁻¹ ) | 2000 |
Latent heat of fusion ( J g⁻¹ ) | 75.00 |
Melting point ( C ) | 1021.00 |
Specific heat ( J K⁻¹ kg⁻¹ ) | 205.0 @25℃ |
Thermal conductivity ( W m⁻¹ K⁻¹ ) | 13.00 @0-100℃ |
Mechanical Properties(机械性能) |
Bulk modulus ( GPa ) ( Polycrystalline ) | 33.3 |
Hardness - Vickers ( kgf mm⁻² ) ( Polycrystalline ) | 35 |
Material condition | Polycrystalline |
Poisson's ratio ( Polycrystalline ) | 0.310 |
Tensile modulus ( GPa ) ( Polycrystalline ) | 37.90 |
Tensile strength ( MPa ) ( Polycrystalline ) | 172.00 |
Yield strength ( MPa ) ( Polycrystalline ) | 165.0 |
Physical Properties(物理性质) |
Boiling point ( C ) | 3068 |
Density ( g cm⁻³ ) | 7.004 @20℃ |
Electrical Properties(电气特性) |
Electrical resistivity ( μOhmcm ) | 64@20℃ |
Temperature coefficient ( K⁻¹ ) | 0.00164 @0-100℃ |