试剂仪器设备原料
金牌会员第2
访问量: 5356122   网址: goodfellow.cnreagent.com    在线留言 
产品搜索
材料 >> 金属材料
铑,箔, Rh, 0.00025mm厚, 3N
铑,箔, Rh, 0.00025mm厚, 3N图片
品牌: Goodfellow
纯度含量: 99.9%
产地: 英国
索取资料及报价
品牌:Goodfellow
纯度含量:99.9%
产地:英国
产品介绍

The support for this foil cannot be removed without destroying the foil itself.

订货号包装规格
Sizes
175-143-1225mm x 25mm
823-663-4250mm x 50mm

产品参数

Purity[纯度]99.9%
Support[载体]0.125 mm Permanent Polyester
Thickness[厚度]0.00025mm
Typical Analysis(典型分析)
Ag1 PPM
Al40 PPM
Au35 PPM
Ba5 PPM
Bi8 PPM
Ca100 PPM
Cr25 PPM
Cu100 PPM
Fe60 PPM
Mg6 PPM
Mn7 PPM
Ni150 PPM
Pb20 PPM
Pd40 PPM
Pt150 PPM
Ru40 PPM
Si500 PPM
Sn1 PPM
Ti3 PPM
Mechanical Properties(机械性能)
Bulk modulus ( GPa ) ( Hard )276.0
Bulk modulus ( GPa ) ( Soft )276.0
Hardness - Vickers ( kgf mm⁻² ) ( Hard )300
Hardness - Vickers ( kgf mm⁻² ) ( Soft )120
Material conditionHard
Material conditionSoft
Poisson's ratio ( Hard )0.260
Poisson's ratio ( Soft )0.260
Tensile modulus ( GPa ) ( Hard )379.00
Tensile modulus ( GPa ) ( Soft )379.00
Tensile strength ( MPa ) ( Hard )1380.00 - 2070.00
Tensile strength ( MPa ) ( Soft )690.00 - 760.00
Yield strength ( MPa ) ( Soft )69.0 - 275.0
Electrical Properties(电气特性)
Electrical resistivity ( μOhmcm )4.7@20℃
Temperature coefficient ( K⁻¹ )0.00440 @0-100℃
Thermal emf against Pt (cold 0C - hot 100C) ( mV )0.70
Thermal Properties(热性能)
Coefficient of thermal expansion ( x10⁻⁶ K⁻¹ )8.500 @0-100℃
Latent heat of evaporation ( J g⁻¹ )4800
Latent heat of fusion ( J g⁻¹ )210.00
Melting point ( C )1965.00
Specific heat ( J K⁻¹ kg⁻¹ )244.0 @25℃
Thermal conductivity ( W m⁻¹ K⁻¹ )150.00 @0-100℃
Atomic Properties(原子属性)
Atomic number45
Atomic weight ( amu )102.90550
Crystal structureFace Centred Cubic
Electronic structureKr4d⁸5s¹
Ionisation potential ( No./eV )1 / 7.46
Ionisation potential ( No./eV )3 / 31.1
Ionisation potential ( No./eV )2 / 18.1
Photo-electric work function ( eV )4.60
Thermal neutron absorption cross-section ( Barns )150.0000
Valences shown2 ,3,4,5,6
Physical Properties(物理性质)
Boiling point ( C )3727
Density ( g cm⁻³ )12.400 @20℃

其他参数

公差

长度<100mm±1mm
≥100mm+2% / -1%
直径<100mm±1mm
≥100mm+2% / -1%
厚度<0.01mm±25%
≤0.05mm±15%
>0.05mm±10%
长度 1<100mm±1mm
≥100mm+2% / -1%
长度 2<100mm±1mm
≥100mm+2% / -1%
相关产品
我要咨询 关闭
  •      
  • 姓名* 
  • 电话* 
  • 单位* 
  • email 
  • 留言内容*
  • 验证码*  
  • 让更多商家关注