This material may be used to form one leg of an high-temperature thermocouple.
For high-temperature thermocouples we supply Platinum, Platinum/Rhodium alloys, Tungsten and Tungsten/Rhenium alloys.
| 订货号 | 包装规格 |
| Length (Round) |
| 530-094-56 | 0.05 m |
| 261-820-09 | 0.1 m |
| 727-505-84 | 0.2 m |
| 938-229-47 | 0.5 m |
产品参数
| Diameter[直径] | 1mm |
| Length[长度] | 0.05 m - 0.5 m |
| Temper[状态] | Annealed |
| Thermocouple Wire[热电偶线] | May Be Used As One Component Of A Thermocouple |
| Typical Analysis(典型分析) |
| Al | 5 PPM |
| B | 1 PPM |
| C | 30 PPM |
| Ca | 1 PPM |
| Co | 5 PPM |
| Cr | 5 PPM |
| Cu | 2 PPM |
| Fe | 50 PPM |
| H | 5 PPM |
| K | 2 PPM |
| Mg | 1 PPM |
| Mn | 4 PPM |
| Mo | 40 PPM |
| N | 10 PPM |
| Na | 2 PPM |
| Ni | 6 PPM |
| O | 40 PPM |
| Re | 25 Percent |
| Si | 10 PPM |
| Sn | 4 PPM |
| Ti | 2 PPM |
| Zr | 2 PPM |
| Thermal Properties(热性能) |
| Coefficient of thermal expansion ( x10⁻⁶ K⁻¹ ) | 4.480 @0-500℃ |
| Melting point ( C ) | 3100.00 |
| Physical Properties(物理性质) |
| Density ( g cm⁻³ ) | 19.700 |
| Mechanical Properties(机械性能) |
| Elongation at break ( % ) | < 20.0 |
| Modulus of elasticity ( GPa ) | 370.0 - 430.0 |
| Tensile strength ( MPa ) | 1310.00 - 2100.00 |
| Electrical Properties(电气特性) |
| Electrical resistivity ( μOhmcm ) | 29 |
其他参数
公差
