(+)-JQ-1 (JQ1) is a potent, specific, and reversibleBET bromodomaininhibitor, withIC₅₀s of 77 and 33 nM for the first and second bromodomain (BRD4(1/2))^[1]. (+)-JQ-1 also activatesautophagy^[2].

IC50: 77/33 nM (BRD4(1/2))^[1]

(+)-JQ-1 represents a potent, highly specific and Kac competitive inhibitor for the BET family of bromodomains. (+)-JQ-1 (100 nM, 48 h) prompts squamous differentiation exhibited by cell spindling, flattening and increased expression of keratin. (+)-JQ-1 (250 nM) induces rapid expression of keratin in treated NMC 797 cells compared to (-)-JQ1 (250 nM) and vehicle controls, as determined by quantitative immunohistochemistry.(+)-JQ-1 (250 nM) elicits a time-dependent induction of strong (3+) keratin staining of treated NMC 797 cells, compared to (-)-JQ1 (250 nM)^[1]. De-repression of autophagy genes is observed almost immediately after (+)-JQ-1 addition^[2]. (+)-JQ-1 is a potent thienodiazepine inhibitor (K_d=90 nM) of the BET family coactivator protein BRD4, which is implicated in the pathogenesis of cancer via transcriptional control of the MYC oncogene. Dose-ranging studies of (+)-JQ-1 demonstrates potent inhibition of H4Kac4 binding with a IC₅₀value of 10 nM for murine BRDT(1) and 11 nM for human BRDT(1)^[3].

Matched cohorts of mice with established tumors are randomized to treatment with (+)-JQ1 (50 mg/kg) or vehicle, administered by daily intraperitoneal injection. Prior to randomization, and after four days of therapy, mice are evaluated by FDG-PET imaging. A marked reduction in FDG uptake is observed with (+)-JQ1 treatment. Tumor-volume measurements confirm a reduction in tumor growth with JQ1 treatment. Pharmacokinetic studies of (+)-JQ1 are performed in CD1 mice following intravenous and oral administration. Mean plasma concentration-time profiles of (+)-JQ1 after intravenous dosing (5 mg/kg). The pharmacokinetic parameters for intravenous (+)-JQ1 demonstrate excellent drug exposure (AUC=2090 hr*ng/mL) and an approximately one hour half-life (T1/2). Mean plasma concentration-time profiles of (+)-JQ1 after oral dosing (10 mg/kg). The pharmacokinetic parameters for oral (+)-JQ1 demonstrate excellent oral bioavailability (F=49%), peak plasma concentration (C_max=1180 ng/mL) and drug exposure (AUC=2090 hr*ng/mL)^[1].

456.99

Solid

C₂₃H₂₅ClN₄O₂S

1268524-70-4

Room temperature in continental US; may vary elsewhere.

DMSO : ≥ 45 mg/mL(98.47 mM)

*"≥" means soluble, but saturation unknown.

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： 20%HP-β-CDin saline

  Solubility: 10 mg/mL (21.88 mM); Suspended solution; Need ultrasonic
• 2.

  请依序添加每种溶剂： 5% DMSO    40%PEG300   5%Tween-80   50% saline

  Solubility: 5 mg/mL (10.94 mM); Suspended solution; Need ultrasonic
• 3.

  请依序添加每种溶剂： 5% DMSO    95% (20%SBE-β-CDin saline)

  Solubility: ≥ 5 mg/mL (10.94 mM); Clear solution
• 4.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 2.5 mg/mL (5.47 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (5.47 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 5.

  请依序添加每种溶剂： 10% DMSO    90% (20%SBE-β-CDin saline)

  Solubility: ≥ 2.5 mg/mL (5.47 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (5.47 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明
• 6.

  请依序添加每种溶剂： 10% DMSO    90%corn oil

  Solubility: ≥ 2.5 mg/mL (5.47 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (5.47 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。