Elesclomol (STA-4783) is a potent copper ionophore and promotes copper-dependent cell death (cuproptosis). Elesclomol specifically binds ferredoxin 1 (FDX1) α2/α3 helices and β5 strand. Elesclomol inhibits FDX1-mediated Fe-S cluster biosynthesis. Elesclomol is anoxidative stressinducer that inducescancercellapoptosis. Elesclomol is areactive oxygen species(ROS)inducer. Elesclomol can be used for Menkes and associated disorders of hereditary copper deficiency research^[1][2][3][4].

Elesclomol (STA-4783) binds the FDX1 α2/α3 helices and β5 strand, but does not bind the paralog protein FDX2. Elesclomol-Cu(II) is an FDX1 neo-substrate. FDX1 protein binds and reduces the elesclomol-Cu(II) complex^[1].
Elesclomol-Cu (1:1 ratio) (40 nM) for only 2 hours results in a 15- to 60-fold increase in intracellular copper levels that triggered cell death more than 24 hours later in ABC1 cells^[1].
The addition of copper to elesclomol at a 1:1 molar ratio prior to treatment significantly reduces cell viability when cells are grown in glycolytic (glucose media) conditions^[2].
Elesclomol (200 nM; 18 hours) treatment increases the number of early and late apoptotic cells in HSB2 cells. Elesclomol induces apoptosis in cancer cells through the induction of oxidative stress^[3].
Elesclomol significantly inhibits the cell viability of SK-MEL-5, MCF-7, and HL-60 cells with IC₅₀values of 110 nM, 24 nM and 9 nM, respectively^[5].

Elesclomol (10 mg/kg; subcutaneous injection; every three days from post-natal day 5 to 26 and once weekly until post-natal day 54) treatment ameliorates severe cardiac pathology with a partial reduction in hypertrophy. Cardiac [Cu] increased with Elesclomol treatment from a vehicle knockout level of 34 to 55%^[4].
Elesclomol escorted copper to the mitochondria and increased cytochrome c oxidase levels in the brain. Elesclomol prevents detrimental neurodegenerative changes and improved the survival of the mottled-brindled mouse^[4].

400.52

Solid

C₁₉H₂₀N₄O₂S₂

488832-69-5

伊利司莫

Room temperature in continental US; may vary elsewhere.

DMSO : 100 mg/mL(249.68 mM;Need ultrasonic)

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： 50%PEG300   50% saline

  Solubility: 5 mg/mL (12.48 mM); Suspended solution; Need ultrasonic
• 2.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 2.5 mg/mL (6.24 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (6.24 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 3.

  请依序添加每种溶剂： 10% DMSO    90% (20%SBE-β-CDin saline)

  Solubility: ≥ 2.5 mg/mL (6.24 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (6.24 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明