BAY 60-6583 is a potent and high-affinity agonist ofadenosine A_2Breceptor (EC₅₀ = 3 nM) over A1, A2A, and A3 receptors. BAY 60-6583 binds to mouse, rabbit, and dog A2BAR withK_ivalues of 750 nM, 340 nM and 330 nM, respectively. BAY 60-6583 has a cardioprotective effect in a myocardial ischemia model^[1][5].

BAY 60-6583 exhibits EC₅₀values for receptor activation >10,000 nM for both A1 and A2A AR and 3 nM for A2B AR subtype in CHO cells expressing recombinant human A1, A2A or A2B ARs^[1].
BAY 60-6583(0-10 μM) exhibits the maximum agonist effect of BAY in the absence of siRNA is 68 %, which is significantly different from that in the presence of 5, 50 and 500 nM siRNA (54%, 48% and 36%, respectively). It exhibits EC₅₀ values of BAY in the absence and presence siRNA with 98±22, 102±17, 127±31 and 93±19 nM, respectively, in T24 cells^[3].
BAY 60-6583 (5 μM; 24 hours) increases the accumulation of cells at the G1 phase with a decrease in G2/M phase in RAW264.7 preosteoclasts^[4].
BAY 60-6583 (5 μM; 24 hours) specifically inhibits the activation of Akt by M-CSF, whereas M-CSF-induced ERK1/2 activation is not affected by BAY 60-6583 treatment in RAW264.7 preosteoclasts^[4].

BAY 60-6583 (intravenous injection; 100 mcg/kg) reduces the infarction area just prior to reperfusion in ischaemic rabbit hearts^[1].
BAY 60-6583 (intraperitoneal injection; 2 mg/kg) attenuates LPS-induced lung injury, pre-treatment with this compound can significantly decrease LPS-increased IL-6 levels in WT-mice, In contrast, BAY 60-6583 treatment is ineffective in abrogating these inflammatory parameters in A2BAR^–/– mice^[2].
BAY 60-6583 (intratumoral administration) causes a significant increase in tumor-infiltrating MDSCs, it does not affect neither their ability to suppress T-cell proliferation nor their degree of maturation, it also stimulates the production of IL-10 and CCL2 in the tumor tissue^[5].

379.44

Solid

C₁₉H₁₇N₅O₂S

910487-58-0

Room temperature in continental US; may vary elsewhere.

DMSO : 100 mg/mL(263.55 mM;Need ultrasonic)

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 4.17 mg/mL (10.99 mM); Clear solution

  此方案可获得 ≥ 4.17 mg/mL (10.99 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 41.7 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 2.

  请依序添加每种溶剂： 10% DMSO    90%corn oil

  Solubility: ≥ 4.17 mg/mL (10.99 mM); Clear solution

  此方案可获得 ≥ 4.17 mg/mL (10.99 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。

  以 1 mL 工作液为例，取 100 μL 41.7 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。