TM5275 sodium is a plasminogen activator inhibitor (PAI-1) with anIC₅₀of 6.95 μM.

IC50: 6.95 μM (PAI-1)^[1]

Docking studies shows that TM5275 binds to strand 4 of the A β-sheet (s4A) position of PAI-1. TM5275 is a selective PAI-1 and (up to 100 μM) does not interfere with other serpin/serine protease systems^[1]. TM5275 at concentrations of 20 and 100 μM significantly prolongs the retention of tPA-GFP on VECs by inhibiting tPA-GFP-PAI-1 high-molecular-weight complex formation. TM5275 enhances the time-dependent accumulation of plasminogen as well as the dissolution of fibrin clots on and around the tPA-GFP-expressing cells^[2]. Cell viability at 72 h treatment is decreased with 70-100 μM TM5275 in ES-2 and JHOC-9 cells. From 48 h up to 96 h, cell growth is suppressed with 100 μM TM5275. Active PAI-1 in cell culture media is significantly decreased in cells treated with 100 μM TM5275 compared to control treatment. TM5275 is suggested to exert anti-proliferative effects in ovarian cancer with high PAI-1 expression^[3].

TM5275 exhibits a favorable pharmacokinetics profile and very low toxicity to mice and rats. In rat thrombosis models. Blood clot weights are significantly lower in rats administered 10 and 50 mg/kg of TM5275 (60.9±3.0 and 56.8±2.8 mg, respectively) than in vehicle-treated rats (72.5±2.0 mg). The antithrombotic effectiveness of TM5275 (50 mg/kg) is equivalent to that of ticlopidine (500 mg/kg), a reference antithrombotic compound. Plasma concentration of TM5275 reaches 17.5±5.2 μM after a dose of 10 mg/kg. TM5275 (5 mg/kg) combined with tPA (0.3 mg/kg) significantly enhances the antithrombotic effect of tPA (0.3 mg/kg) alone and provides a benefit similar to that of a high tPA dose (3 mg/kg)^[1].

543.97

Solid

C₂₈H₂₇ClN₃NaO₅

1103926-82-4

Room temperature in continental US; may vary elsewhere.

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

DMSO : 62.5 mg/mL(114.90 mM;Need ultrasonic)

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month (sealed storage, away from moisture)。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 2.5 mg/mL (4.60 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (4.60 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 2.

  请依序添加每种溶剂： 10% DMSO    90% (20%SBE-β-CDin saline)

  Solubility: ≥ 2.5 mg/mL (4.60 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (4.60 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明
• 3.

  请依序添加每种溶剂： 10% DMSO    90%corn oil

  Solubility: ≥ 2.5 mg/mL (4.60 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (4.60 mM，饱和度未知) 的澄清溶液，此方案不适用于实验周期在半个月以上的实验。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中，混合均匀。