NU6102 是一种有效的CDK1和CDK2抑制剂,对CDK1/cyclinB和CDK2/cyclinA3的IC50分别为 9.5 nM 和 5.4 nM。NU6102 对CDK1/CDK2的选择性比对 CDK4 (IC50为 1.6 μM),DYRK1A (IC50为 0.9 μM),PDK1 (IC50为 0.8 μM) 和 ROCKII (IC50为 0.6 μM) 高。
生物活性 | NU6102 is a potentCDK1andCDK2inhibitor withIC50s of 9.5 nM and 5.4 nM forCDK1/cyclinBandCDK2/cyclinA3, respectively. NU6102 shows selectivity forCDK1/CDK2overCDK4(IC50of 1.6 μM), DYRK1A (IC50of 0.9 μM), PDK1 (IC50of 0.8 μM) and ROCKII (IC50of 0.6 μM)[1][2]. |
IC50& Target[1][2] | Cdk1/cyclin B 9.5 nM (IC50) | CDK2/cyclin A3 5.4 nM (IC50) | CDK4 1.6 μM (IC50) | DYRK1A 0.9 μM (IC50) | PDK1 0.8 μM (IC50) |
|
体外研究 (In Vitro) | NU6102 (0-30 μM; 1-24 hours; SKUT 1B cells) treatment induces a G2 arrest, inhibition of Rb phosphorylation and cytotoxicity (LC502.6 μM for a 24 h exposure) in SKUT-1B cells[3]. NU6102 inhibits cell growth and causes cell cycle phase arrest in human breast cancer cell lines, G2/M arrest in asynchronously growing cell lines and G1/S arrest in cells released from serum starvation, and in Xenopus nuclei in a timedependent manner[3]. NU6102 selectively inhibits the growth of CDK2 WT (wild type) versus KO MEFs (knockout mouse embryo fibroblasts) (GI50of 14 μM versus >30 μM)[3].
Cell Cycle Analysis[3] Cell Line: | SKUT 1B cells | Concentration: | 0 μM, 3 μM, 10 μM, and 30 μM | Incubation Time: | 1 hours, 3 hours, 6 hours, and 24 hours | Result: | Induced a G2 arrest, inhibition of Rb phosphorylation and cytotoxicity (LC502.6 μM for a 24 h exposure). |
|
体内研究 (In Vivo) | The pharmacokinetics of NU6102 is determined following i.v. and i.p. administration in Balb/C mice. The limited solubility of NU6102 meant the maximum administrable dose is 1 mg/kg i.v. and 10 mg/kg i.p. NU6102 is liberated following either i.p. or i.v. administration of NU6301, and following i.v. administration peak plasma levels of 12 μM NU6102 is observed 5 min post administration, whereas following administration of the maximum administrable dose of NU6102 i.v. the peak concentration achieved is 0.92 μM. The plasma half-life of NU6102 liberated following administration of NU6301 is 42 min following i.p. and 10 min following i.v. administration[3].
|
分子量 | |
性状 | |
Formula | |
CAS 号 | |
运输条件 | Room temperature in continental US; may vary elsewhere. |
储存方式 | Powder | -20°C | 3 years | | 4°C | 2 years | In solvent | -80°C | 6 months | | -20°C | 1 month |
|
溶解性数据 | In Vitro: DMSO : 100 mg/mL(248.47 mM;Need ultrasonic) 配制储备液 1 mM | 2.4847 mL | 12.4233 mL | 24.8466 mL | 5 mM | 0.4969 mL | 2.4847 mL | 4.9693 mL | 10 mM | 0.2485 mL | 1.2423 mL | 2.4847 mL |
*请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 储备液的保存方式和期限:-80℃, 6 months; -20℃, 1 month。-80℃ 储存时,请在 6 个月内使用,-20℃ 储存时,请在 1 个月内使用。 In Vivo: 请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液,再依次添加助溶剂: ——为保证实验结果的可靠性,澄清的储备液可以根据储存条件,适当保存;体内实验的工作液,建议您现用现配,当天使用;
以下溶剂前显示的百 分比是指该溶剂在您配制终溶液中的体积占比;如在配制过程中出现沉淀、析出现象,可以通过加热和/或超声的方式助溶 1. 请依序添加每种溶剂: 10% DMSO 40%PEG300 5%Tween-80 45% saline Solubility: ≥ 2.5 mg/mL (6.21 mM); Clear solution
此方案可获得 ≥ 2.5 mg/mL (6.21 mM,饱和度未知) 的澄清溶液。 以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中,混合均匀;向上述体系中加入50 μL Tween-80,混合均匀;然后继续加入 450 μL生理盐水定容至 1 mL。 2. 请依序添加每种溶剂: 10% DMSO 90% (20%SBE-β-CDin saline) Solubility: ≥ 2.5 mg/mL (6.21 mM); Clear solution
此方案可获得 ≥ 2.5 mg/mL (6.21 mM,饱和度未知) 的澄清溶液。 以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中,混合均匀。 3. 请依序添加每种溶剂: 10% DMSO 90%corn oil Solubility: ≥ 2.5 mg/mL (6.21 mM); Clear solution
此方案可获得 ≥ 2.5 mg/mL (6.21 mM,饱和度未知) 的澄清溶液,此方案不适用于实验周期在半个月以上的实验。 以 1 mL 工作液为例,取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL玉米油中,混合均匀。 *以上所有助溶剂都可在本网站选购。
|