Ruboxistaurin (LY333531) hydrochloride is an orally active, selectivePKCbetainhibitor (K_i=2 nM). Ruboxistaurin hydrochloride exhibits ATP dependent competitive inhibition ofPKCbeta I with anIC₅₀of 4.7 nM. Ruboxistaurin hydrochloride inhibitsPKCbeta II with anIC₅₀of 5.9 nM^[1][2].

Ruboxistaurin hydrochloride is a selective and ATP-competitive PKCβ inhibitor, with IC₅₀s of 4.7 and 5.9 nM for PKCβI and PKCβII, shows less potent inhibition on PKCη (IC₅₀, 52 nM), PKCα (IC₅₀, 360 nM), PKCγ (IC₅₀, 300 nM), PKCδ (IC₅₀, 250 nM), and has no effect on PKCζ (IC₅₀, >100 μM)^[1]. Ruboxistaurin (10 and 400 nM) dramatically inhibits glucose-induced monocyte adherence to levels that are not different from baseline adherence of monocytes to endothelial cells under NG conditions. Ruboxistaurin (10 and 400 nM) dose not alter the endothelial expression of adhesion molecules or modify endothelial cell growth^[2]. Ruboxistaurin (LY333531; 10 nM) reduces high-glucose (HG)-induced human renal glomerular endothelial cells (HRGECs) viability, and inhibits the increases in swiprosin-1 in HRGECs incubated with HG^[3].

Ruboxistaurin (1 mg/kg; 8 weeks) markedly reduces GEC apoptosis as well as swiprosin-1 upregulation, and ameliorates renal glomerular injury in the diabetic mice. Ruboxistaurin also potently attenuates the expression of PARP, cleaved-caspase9, cleaved-caspase3, and the Bax/Bcl-2 ratio, in diabetic mice^[3]. Ruboxistaurin (0.1, 1.0, or 10.0 mg/kg; p.o.) dramatically reduces the number of leukocytes trapped in the retinal microcirculation of diabetic rats^[4].

505.01

Solid

C₂₈H₂₉ClN₄O₃

169939-93-9

鲁伯斯塔盐酸盐

Room temperature in continental US; may vary elsewhere.

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

DMSO : 6.67 mg/mL(13.21 mM;Need ultrasonic)

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80℃, 6 months; -20℃, 1 month (sealed storage, away from moisture)。-80℃ 储存时，请在 6 个月内使用，-20℃ 储存时，请在 1 个月内使用。

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照In Vitro方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂： 10% DMSO    40%PEG300   5%Tween-80   45% saline

  Solubility: ≥ 0.67 mg/mL (1.33 mM); Clear solution

  此方案可获得 ≥ 0.67 mg/mL (1.33 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 6.7 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH2O 中，得到澄清透明的生理盐水溶液
• 2.

  请依序添加每种溶剂： 10% DMSO    90% (20%SBE-β-CDin saline)

  Solubility: ≥ 0.67 mg/mL (1.33 mM); Clear solution

  此方案可获得 ≥ 0.67 mg/mL (1.33 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 6.7 mg/mL 的澄清 DMSO 储备液加到 900 μL20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明